This view lists all network-connected devices found from the subnets of organization network by Miradore network discovery. The network discovery tool automatically scans all subnets that have the feature enabled on regular basis, thus keeping the hardware inventory information constantly up-to-date. In addition to automated scans, the network discovery can be initiated manually using the Subnets view.
Additionally, the view displays which devices have Miradore client installed and provides tools for performing a remote installation of Miradore client into the devices that are not managed with Miradore.
Operations > Connectors data > Network discovery
Section |
Available attributes |
Catalog columns |
Device name, IP address, Location, Miradore asset created, Miradore client installed, Network address, Operating system, Scan date, subnet mask |
Summary dimensions |
Location, Miradore asset created, Miradore client installed, Operating system |
View filters |
Device name, IP address, Miradore asset created, Miradore client installed, Network address, Operating system, Scan date, Subnet mask |
Note! this may not be the full list of available attributes
Property |
Description |
Data update interval |
Default interval of the network discovery scan is 6 hours. The network discovery is performed for all subnets that have the network discovery feature enabled. |
Data calculation interval |
- |
Excluded items |
- |
Default filters |
- |
Task |
Description |
Export |
By default, this task exports all the view contents in the selected file format. However, you can use the check boxes in the view to export selected rows only. You can select rows for the export from one page of the view at a time. The supported file formats for the data export are CSV, Excel, and PDF. In some views, configuration items can be also exported to a group distribution. |
Prints the view contents. |
|
Tools > Install Miradore client |
Installs Miradore client to the selected devices. In the popup which opens, you can select which user account and client deployer should be used to install the client. In addition, there is a check box "Prefer IP over device name". When this is selected, the client installation uses IP address for connecting to the device. This is useful, for example, if there is many devices with the same device name in the Miradore instance, or if the device name has been changed recently. The client installation status can be seen from Miradore client installations view (Operations > Software management > Installation status > Miradore client installations). |
Tools > Remove selected results |
Removes the selected network discovery results from the view. |
Tools > Remove all results |
Removes all network discovery scan results from the view. |