This tab contains settings for Miradore Windows client.
General settings
Attribute |
Description |
Startup delay |
Client startup delay in seconds. Client first tries to connect Miradore server after this time. Make sure that Miradore client startup delay is shorter than scheduler startup delay. |
Polling interval |
How often the client polls for new jobs. Default value is 3600 seconds. |
Log severity |
Severity level for logging. Possible levels are Verbose, Debug,and Info. Only such events are logged which are at least the level that is selected. |
Show remarks |
Show Miradore client remarks. |
Inventory settings
Attribute |
Description |
Scheduler startup delay |
The time how long inventory scheduler startup is delayed after system startup. Make sure that scheduler startup delay is greater than Miradore client startup delay. |
Config update interval |
Configuration update interval defines the interval, in minutes for updating the scheduler configuration. After the interval has elapsed, scheduler checks whether the job configuration file, on the Miradore server has been updated or not. If there is a newer version of the job configuration file available on the Miradore server, the job configuration file is downloaded and duplicated to the client as well. The default value of this field is 1440. |
Scheduler polling |
This setting applies only to Miradore Windows client 3.0.0 and older versions. Newer Miradore Windows clients don't use this setting. This field defines, in seconds the interval how often Miradore client's scheduler component checks whether is should run scheduler jobs like hardware inventory scan or software inventory scan etc. The running interval is pre-defined for each scheduler job separately. For newer than 3.0.0 Miradore Windows clients, it is possible to configure the running interval of inventory jobs etc. using Scheduled task profile items. The system settings can be found from Administration > System settings > Clients > General in the management console of Miradore. |
Scheduler timeout |
The time how long inventory scheduler can process scans. After this timeout value scheduler process is killed. |
Usage monitoring enabled |
If set to 'Yes', client monitors software usage. This option is available only in clients version 2.1.0 and higher. |
Power monitoring enabled |
Determines whether the client monitors the device power states or not. If set to 'Yes', client collects information of device power states. |
Installation settings
Attribute |
Description |
Installation path |
Enter the Client default installation path (Default = %program files%\Miradore). This path is used when installing the client in initial installation. |
Logfile path |
Enter the Client default installation path (Default = %program files%\Miradore). This path is used when installing the client in initial installation. |
Configure Windows firewall |
If this option is set to 'Yes', Client creates rules to Windows built-in firewall to allow traffic through Connector- and Listen ports. |
Related to
See also